How to solve common problems of Korean mask machine?

- Oct 21, 2020-

Typically, the drive system of Korean mask machine includes motors, gears, gears, gearboxes, shruff wheels, chains, conveyor belts and other components. We need to check whether there are dust and other things on the outer surface of the motor that affect heat dissipation, whether the gears and sprocket are oiled, and whether there are adhesions. Is the tightness of the chain suitable? Is there any foreign matter? Is the connection screw between the transmission parts loose? Is the lubricating oil of the reducer enough? Usually it needs to change the lubricating oil once in 1000-1500 hours.

◆Turn on the power switch, the ultrasonic power indicator does not light up and there is no action. The factors for checking Korean mask machines are as follows:

The power mask machine wire is in poor contact with the power socket; the power fuse is burned;

◆Turn on the power switch of the KF94 mask machine, the power indicator light is on, but there is no action, according to the ultrasonic output machine, ultrasonic test button.

Factors: Five cores have A. Mask machine connection; B. Machine program circuit board failure.

Korean mask machine

◆Turning on the mask with the switch power supply, the indicator light of the KF94 mask machine is on, but there is no action. According to the Korean mask machine ultrasonic test button, there is no ultrasonic output.

The factors are: A. Press the emergency stop switch of the mask machine; B. The 110V or 24V power supply of the ultrasonic power transformer of the mask machine is abnormal; the circuit board of the machine tool program is defective.

◆The KF94 mask machine works, but pressing the ultrasonic test button of the mask machine and the button has no ultrasonic output

Factors: A. The 110V power supply of the ultrasonic power transformer of the mask machine is abnormal; the 110V power line B. The ultrasonic circuit board of the mask machine is out.

◆The mask can work normally when the test button is pressed, but the mask machine does not work.

Factor: the operation switch is damaged; the five-pin seat and the B mask machine are connected to the open frame.


If you want to know us, please contact: wym@eagleco.cn



Previous:Why should we buy a Korean mask machine? Next:How to reduce the defective rate of 1+1 Face Mask Machine production?