How to maintain the fully automatic KF94 face mask machine?

- Sep 25, 2020-

The power supply for the automatic KF94 face mask machine is 220V. Check whether the power supply voltage is consistent and stable when connected to the power supply. Only when it is consistent and stable can the power supply be connected. Otherwise, the power system, ultrasonic system and accidents may be easily damaged!

The automatic KF94 fish face mask machine must be well grounded at all times when it is connected to avoid leakage of electricity and hurt people!

When the weather is dry or the temperature is low, some parts of the automatic KF94 mask machine may be electrostatically charged due to the friction of the raw materials. Please take care!

Non-professionals are not allowed to move! The KF94 face mask machine must be stopped when threading materials, adjusting parts, checking or repairing the machine! The power must be cut off when the electrical part is maintained!

Do not open the electric box and ultrasonic system by non-professionals or maintenance personnel!

The air pressure is required to be around 0.5P—0.6P, please do not work in the range below and above the air pressure!

KF94 face mask machine

During the process, please do not touch the electrical components, such as: ultrasonic electric box, vibrator (with high voltage, please discharge first when disassembling), welding head, etc.

When the automatic KF94 fish mask machine is running, please do not touch the moving mechanical parts, blades, scissors parts, cylinders, etc. to avoid accidents!

After replacing the accessories of the ultrasonic system, the ultrasonic frequency must be detected and adjusted before it can be started and run! Otherwise it will cause damage to the ultrasonic system and welding head!

Check the tightness of belts and chains once a week. The lubricating oil should be changed regularly for parts such as chain sprocket!

The sequence of starting up every day is: check the air source and equipment condition, then turn on the main power, followed by the ultrasonic system. When shutting down, turn off the ultrasonic system and then turn off the main power!

The automatic KF94 fish mask machine reminds you to replace the lubricant every 1000 hours of operation!

When the automatic KF94 fish mask machine is not running for a long time, please apply anti-rust oil to the rust-prone parts!

The above is the maintenance and precautions of the automatic KF94 face mask machine described by Topeagle editors. I hope it will help you!


If you want to know us, please contact: wym@eagleco.cn


Previous:What are the components of the KF94 Face Mask Machine equipment? Next:What are the components of the KF94 face mask machine?