Function description of vibration box of ultrasonic lacing machine

- Jun 09, 2020-

Function description of vibration box of ultrasonic lacing machine

1) Amplitude display: Its function refers to whether the resonance between the ultrasonic oscillator and the steel mold is appropriate. Rotate the tone adjustment knob to make the reading change. Generally adjusted to less than 50.

2) The current meter: indicates the working current of the ultrasonic wave. Empty load indicates that the welding head and the system resonance of the state, generally normal 0.4 to 0.6A, depending on the size of the output power varies, the load, depending on the pressure area and flower wheel and complex, size, usually 1.0 to 2.5A. 

3) Power output: adjust the output power size to different file bits, the current meter reading will change.

4) Model speed: Adjust the speed of the flower wheel. The larger the number, the faster the speed, the faster;

5) Die speed: Adjust the speed of ultrasonic steel mold. The larger the number of digits, the faster the speed; 


6) Manual/automatic switch: hit the automatic gear, the flower wheel and the steel mold automatically run, hit the manual switch, the operation of the flower wheel and steel mold is controlled by the foot pedal of the right foot, step down the pedal wheel and steel mold to start working, release the pedal wheel and steel mold to stop running. 

7) Overload indication of ultrasonic lacing machine: The red light is on to indicate that the device is overloaded. You should stop immediately and check the cause until troubleshooting before you can continue working. 

8) Sound wave adjustment: Adjust the resonant state between the ultrasonic vibrator and the steel mold. Turn the knob clockwise or counterclockwise, the amplitude meter reading will change, as previously stated, the normal reading is generally within 50.

9) Sound wave test: The function is to test whether the ultrasound is ok. Press the sound wave test switch for 1 to 2 seconds to see if the overload indicator is on and whether the amplitude meter and current meter reading are within the normal range.

10) Power switch: Control the whole machine power supply. The switch comes with a red light that is on when turned on.

If you want to know ultrasonic lacing machine, please contact:

Previous:Installation and adjustment of ultrasonic lace machine wheel Next:Function description of the machinery of ultrasonic lace machine