Compound Feed Heavy Duty Lockstitch Sewing Machines series
Features: Compound Feed Heavy Duty Lockstitch Sewing Machine is the latest of TOPEAGLE brand heavy duty sewing machines, which is designed with large vertical rotating hooks for thread loop catching and sliding bars for thread up-taking. It has been sub-classed into single needle, two needles, single needle with under-trimmer and two needles with under-trimmer.singgle needle long arm machine, double needle long arm machine, long arm machine with auto thread trimmer,Extra high long arm machine.
Fully automatic lubrication system, large hook, safety clutch.Dial for alternating movement.
Pneumatic auto-lifer,automatic revese sewing, automatic thread trimme. back tacking automatic presser feet alternating movement.
The application of needle bearings for arm shaft and hook shaft, dog belt driving, plunger pump lubrication and compound feed by needle bar, presser foot and feed dog provides this series with such splendid features as smooth running, quiet working and a long service life. It is also equipped with a safety clutch to prevent the hooks from damage by over-duty operation. So it is especially available in stitching car seat cushions, safety belts, safety air bags, tents, parachutes, etc.
TCF-1510N Single needle
TCF-1510N-7 Single needle automatic thread trimme
TCF-1510N-L14 Single needle small semi-long arm
TCF-1510N-L 14-7 Singleneedle small semi-long arm automatic thread trimmer
TCF-1560N Double needle
TCF-1560N-7 Double needle automatic thread trimmer
TCF-1560N-L14 Double needle small semi-long arm
TCF-1560N-L14-7 Double needle small semi-long arm, automatic thead trimmer
Gauge set: 4.8, 6.4, 7. 9, 9.5, 12.7, 25.4mm
|Max. Sewing Speed||2500 S.p.m|
|Stitch Length||0-9 mm|
|Needle Bar Stroke||36 mm|
|Thread Take-up lever stroke||74.5 mm|
|Presser foot lift||By Hand: 8mm By Knee: 16 mm|
|Needle Size||DPX17 19#-23#|
|Rotating Hook||Automatic Lubricated Large Rotary Hook|
|Safety Clutch device||Yes|
|Needle Gauge for double needle||Standard: 6.4mm, 3.2, 4.8, 9.5, 12.7 mm is available.|
|Motor||400W 1400 r.p.m and 550W Servo Motor|